Not a good saver? We’ll show you a few tricks that you can use to reduce your additional costs without having to limit yourself. So you save a lot of money in the household – and by the way!
Utility bills are tricky. Depending on how cold the winter was, how much time you spent in front of the TV and how often you took a bath, you have to pay more or less.
In order to save money in the household, you have to reduce your energy consumption: heat less, use less water and use less electricity. But that doesn’t mean that you have to do without hot showers and cozy series evenings from today. Luckily, there are a few products that you can use to automatically and effortlessly reduce your ancillary costs and save a lot of money in the household.
Potential savings: Analyze power consumption
Do you always have particularly high electricity bills, but don’t even know why? Then you should get to the bottom of it. You may be using an old electrical appliance with a poor energy efficiency rating. Or a computer or television that runs permanently in standby mode. You can analyze your power consumption
The best way to do this is with a practical energy cost meter. This tells you which electrical appliances in your household are real power guzzlers and where you can save money with new appliances.
Reduce additional costs: No more standby mode
It’s convenient and practical: only turn off the television during the long-distance relationship and simply close the laptop. Most people know that the device still draws current even then. Nevertheless, most people cannot resist using the standby functions on their electronic devices again and again – albeit with a bad conscience.
The solution for all the lazy: there is a socket that recognizes the standby mode and simply switches itself off. If you want to switch the device on again, you simply use the button, which is connected to the socket with a long cable.
Reduce ancillary costs: Use timers
Some electronic devices are permanently plugged into the power grid, even though you only use them at very predictable times. Examples of this are the mobile phone or laptop charging cable, the coffee machine or the microwave.
Of course, you can simply unplug and leave it plugged in only when you are using the device. If you are too lazy for this, you can also use a socket with a timer. You can program this so that it switches off when you are at work anyway, for example.
Reduce ancillary costs: Timer-thermostats for heating
Saving money in the household in the form of heating costs is tricky. Do you generally heat less, at the risk of freezing? Do you turn down the heating when you go to work, even though you’re still sitting on the sofa in your winter jacket for half an hour in the evening?
Luckily, you don’t have to worry about that because, like outlets, heaters have timers too. With this you can save a lot of money in the household, because heating costs are a particularly important factor in the ancillary costs. Just set it to keep the heat on low while you’re at work and while you’re sleeping.
So that you don’t have to fall asleep, wake up or come home in the cold, you can simply allow for a buffer of 30 to 60 minutes.
Reduce ancillary costs: Less water consumption
Tap water is relatively cheap. Of course, you can also save money at this point if you behave accordingly.
Sure, if you prefer bathing to showering, it could be difficult without changing that habit. For the sinks in the bathroom or kitchen, however, you can buy a practical water-saving jet regulator, which limits the amount of water that escapes.